This guide will show you how to set up the game Pool Attack for you to host. For more information on the game, including how to play, check out our wiki page by clicking here.

Step 1: Place your items

Place 8 chairs on one side of the playing area and the other 8 on the other side, facing each other. Place the 4 pools in the centre, making sure that the space between the pools and the seating which you have used is equal on both sides.

Step 2: Stack 1 of WIRED

Place your WIRED Trigger: User Walks On Furni, open it and select all the Pools. Place your WIRED Effect: Teleport To Furni, open it and select an area that is outside of the playing area. Place these WIRED together to form a stack.

Step 3: Stack 2 of WIRED

Place your WIRED Effect: Move And Rotate Furni, open it and select all the Pools. You will also need to select the option to have the furniture move to all directions by selecting the arrows that form a cross.

Place your WIRED Trigger: User Says Keyword, open it and place it on top of the WIRED Effect: Move And Rotate Furni above. This WIRED will start the movement of the Pools. Set the keyword to something you will remember and to only be activated by you.

Place a WIRED Effect: Match Furni To Position and State and stack this box with the two you have just set above. You don’t need to do anything else with it just yet.

Place a WIRED Trigger: Repeat Effect and select how fast you want the Pools to move. Usually, it starts off with 1 second and then speeds up as the game progresses and there are fewer people. Place it on top of the WIRED Effect: Match Furni To Position and State.

Open the WIRED Effect: Match Furni To Position and State you have placed into the stack and select the WIRED Trigger: Repeat Effect while it is on top of the stack. Make sure “current position in room” is ticked.

Step 4: Stack 3 of WIRED

Place a WIRED Effect: Move And Rotate Furni and select all the Pools. You will need to select no movement before confirming.

Place a WIRED Trigger: User Says Keyword and place it on top of the WIRED Effect: Move And Rotate Furni above. This WIRED will stop the Pools from moving. Set the keyword to something you will remember and to only be activated by you. Stack these two WIRED boxes together.

Remove the WIRED Trigger: Repeat Effect from the PREVIOUS stack and place it in front of the stack it was on.

Place a WIRED Effect: Match Furni To Position and State and select the WIRED Trigger: Repeat Effect while it is in front of the stack. You will also need to select all Pools. Ensure that all Pools are in the centre when you select them. Place this box on the third stack you are currently building. Make sure “current position in room” is ticked.

Test to see that when you say your “start” keyword, the Pools move and when you say your “stop” keyword, they stop.