This guide will show you how to set up the game Balloon Game for you to host. For more information on the game, including how to play, check out our wiki page by clicking here.
Add four sections on the side of your playing area, however big or small you want. Usually, a 3×3 area is used. Inside all four of the sections, place Freeze Tiles. Only place them in the four sections you have just created, not the main gaming area. On top of each Freeze Tile, place a Color Tile using the Stack Tile. Change the colours of the Color Tiles, ensuring that each section has a different colour. The colours will be pink, green, orange, and blue.
Add another section to the playing area, 2×1 in size. Place one Rainbow Balloon inside, and an Exit Tile next to the balloons. Using the Stack Tile, you may add a chair on top of the Exit Tile. However, this is optional.
Place four WIRED Trigger: User Walks On Furni and one WIRED Effect: Teleport To Furni on each of those User Walks On Furnis (you should now have four stacks of two). Open the first WIRED Trigger: User Walks On Furni and select one of the gates. Open the WIRED Effect: Teleport To Furni that’s on top of the Trigger you have just set and select one of the tiles inside of that area.
Do this with the remaining three stacks on the remaining three gates.
Place your WIRED Trigger: Furni State Is Changed and set it to the Rainbow Balloons in the 2×1 area. Place your final WIRED Effect: Teleport To Furni and set it to the playing area; outside of any of the coloured sections.
Place your Counter and set it to 30 seconds. Place your WIRED Effect: Toggle Furni State and set it to the Counter. Place one Floor Switch in the Host’s area. Place your WIRED Trigger: Furni State is Changed and set it to the Floor Switch.
Now, when flick the switch, the Counter will reset and anyone who is stood on the Freeze Tiles will be teleported onto the Exit Tile, where they will be able to pick a balloon for the next round.
Place your second Rainbow Balloons in the Host’s area and you’re done!